PLOT REPORT
-----------

Report File    : D:\CAD\User\Development\CTS-B\CTS-B (PCB - PLOT REPORT).txt
Report Written : Monday, July 22, 2013
Project Path   : D:\CAD\User\Development\CTS-B\CTS-B.prj
Design Path    : D:\CAD\User\Development\CTS-B\CTS-B.pcb
Design Title   : 
Created        : 01/05/2013 19:05:01
Last Saved     : 22/07/2013 22:26:37
Editing Time   : 2401 min
Units          : thou (precision 0)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    2.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 2.3 absolute in inches.
    No zero suppression.


PLOTS OUTPUT
------------
    Plot Job: "D:\CAD\User\Development\CTS-B\CTS-B(Plot).EPJ"


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-B\CTS-B - Top Silk.gbr"

    Layers:
    -------
    Top Silk
    Top Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 1
    D11       Round 5
    D12       Round 10
    D13       Round 236
    D14       Round 60
    D16       Square 60
    D17       Round 70
    D73       Round 8
    D74       Round 197
    D75       Round 157
    D76       Round 118
    D77       Round 125
    D78       Round 60
    D79       Square 60
    D80       Round 60
    D81       Square 71
    D82       Round 71
    D83       Square 70
    D84       Round 79
    D85       Round 87


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-B\CTS-B - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D12       Round 10
    D13       Round 236
    D14       Round 60
    D16       Square 60
    D17       Round 70
    D21       Round 50
    D74       Round 197
    D75       Round 157
    D76       Round 118
    D77       Round 125
    D78       Round 60
    D79       Square 60
    D80       Round 60
    D81       Square 71
    D82       Round 71
    D83       Square 70
    D84       Round 79
    D85       Round 87


Gerber Output
-------------

    "D:\CAD\User\Development\CTS-B\CTS-B - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper

    D-Code    Shape  (thou)
    -----------------------
    D22       Round 246
    D23       Round 70
    D25       Square 70
    D26       Round 80
    D86       Round 207
    D87       Round 167
    D88       Round 128
    D89       Round 135
    D90       Round 70
    D91       Square 70
    D92       Round 70
    D93       Square 81
    D94       Round 81
    D95       Square 80
    D96       Round 89
    D97       Round 97


NC Drill Output
---------------

    Output:
    -------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    "D:\CAD\User\Development\CTS-B\CTS-B - Drill Data - Through Hole.drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.032 in           35   C
    T002        00.043 in           15   D
    T003        00.051 in           16   O
    T004        00.138 in            4   R
    T005        00.157 in            4   Q
    --------------------------------------
    All                             74
    --------------------------------------

NC Drill Output
---------------

    Output:
    -------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    "D:\CAD\User\Development\CTS-B\CTS-B - Drill Data - Through Hole (Unplated).drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.025 in            1   
    --------------------------------------
    All                              1
    --------------------------------------

Gerber Output
-------------

    "D:\CAD\User\Development\CTS-B\CTS-B - Drill Ident Drawing - Through Hole.gbr"

    Layers:
    -------

    Drill Ident Drawing
    -------------------

    Drill     Plated    Size      Shape     ID        
    --------------------------------------------------
    32        Y         100       Round     C         
    43        Y         100       Round     D         
    51        Y         100       Round     O         
    157       Y         100       Round     Q         
    138       Y         100       Round     R         
    --------------------------------------------------

    D-Code    Shape  (thou)
    -----------------------
    D11       Round 5
    D72       Round 100


End Of Report.
